High Torque micro carbon brush dc motor 12v 24v RS 390 395 dc motor for small mixer
Model No.: RS-390SH/RS-395SH
Main Features:
Metal End cap
Strong Magnet
Fluxing Available
Cooling fan available
Encoder available
3 or 5 slots armature
28mm housing diameter
46.5mm housing length
Typical Application:
Small Home appliance
Table Fan
Pump
Smart Robot
Product Showcase:
2D Drawing:
Motor Performance:
MODEL | VOLTAGE | NO LOAD | AT MAXIMUM EFFICIENCY | STALL |
| OPERATING RANGE | NOMINAL | SPEED | CURRENT | SPEED | CURRENT | TORQUE | OUTPUT | TORQUE | CURRENT |
| V | rpm | A | rpm | A | g.cm | mN.m | W | g.cm | mN.m | A |
| RS-390SH-21130 | 6.0~13.0 | 12.0 | 7200 | 0.12 | 6047 | 0.63 | 79.8 | 7.83 | 4.95 | 498 | 48.87 | 3.30 |
| RS-395PH-10220 | 12.0~25.0 | 24.0 | 3900 | 0.04 | 3078 | 0.15 | 60.3 | 5.92 | 1.90 | 286 | 28.07 | 0.56 |
| RS-395SH-18100R | 6.0~25.0 | 24.0 | 9900 | 0.09 | 8465 | 0.52 | 114.5 | 11.24 | 9.94 | 775 | 76.05 | 3.00 |
| RS-390PH-5032R | 3.0~12.0 | 12.0 | 26800 | 0.89 | 23600 | 6.75 | 239 | 23.45 | 57.85 | 2050 | 201.18 | 51.20 |
Pls download the PDF document for referrence.
RS-390SH.pdf
Our Advantages:
With 10 years experienced engineer, we can custom made the performance you need. We can adjust the voltage, speed of the motor, and design the suitable reduction ratio of the gearbox. We can develop new type gearbox according to your requirements if your quantity can meet our requirements.
We can produce the gears by our own hob machine, which we can control the quality of gearbox better. We’re one company who can produce both the motor and the gearbox, in this case, we can provide high quality control for the whole gear motor.
FAQ
Q: Do you have customized service for your standard motors?
A: Yes, we can customize per your request for the voltage, speed, torque and shaft size/shape. If you need additional wires/cables soldered on the terminal or need to add connectors, or capacitors or EMC we can make it too.
Q: Do you have individual design service for motors?
A: Yes, we would like to design motors individually for our customers, but it may need some mould charge and design charge.
Q: Can I have samples for testing first?
A: Yes, definitely you can. After confirmed the needed motor specs, we will quote and provide a proforma invoice for samples, once we get the payment, we will get a PASS from our account department to proceed samples accordingly.
Q: How do you make sure motor quality?
A: We have our own inspection procedures: for incoming materials, we have signed sample and drawing to make sure qualified incoming materials; for production process, we have tour inspection in the process and final inspection to make sure qualified products before shipping.
Product Tags:
|
|
High Torque micro carbon brush dc motor 12v 24v RS 390 395 dc motor for small mixer Images
|
